Ratchet Straps

Ratchet straps are designed to handle most type of flat bed tie-down requirements. Standard ratchet straps have 18" fixed ends, except for straps with chain anchor where the end is 32" long. Special lengths are available upon request. All BTM ratchet straps are labeled to meet or exceed federal (DOT) and state (CHP) regulations. All ratchet straps can be custom sized to fit your needs. BTM offers a complete line of 2, 3, and 4" wide ratchet straps.

P/N RT2WH 2" Ratchet Strap with wire hooks
P/N RT2FSH 2" Ratchet Strap with flat snap hooks
P/N RT2CH 2" Ratchet Strap with chain anchor
P/N RT2GB 2" Ratchet Strap with grab hooks
P/N RT2FH 2" Ratchet Strap with flat hooks
P/N RT2LE 2" Ratchet Strap with loop ends
P/N RT2LOOP 2"Ratchet Strap with endless loop
P/N RT2SE 2" Ratchet Strap with Spring "E"
P/N RT1SE 1" Ratchet Strap with Spring "E"

All BTM Ratchet Straps are manufactured with 12,000lbs. Webbing capacity is 10,000lbs. WWL is 3.335lbs. Except for 2" spring "E" ratchet straps, capacity is 2,500lbs. And 1" sping "E" ratchet strap capacity is 3,000lbs. Custom lengths are available (WE ALSO DO REPAIRS) All Ratchet Straps can be stenciled with your name to prevent loss.

WARNING: All straps should be protected from sharp or rough edges. Straps cut, worn, or damaged need to be replaced immediately. It is the owner's and users responsibility to determine suitability of a product for any particular use. All strap assemblies or systems are strong as the weakest component including the point of attachment.

DO NOT EXCEED CAPACITIES. INSPECT STRAPS BEFORE EACH USE.