Winch Straps

BTM standard winch straps offer a complete line of 2, 3, and 4" winch straps All winch straps are made of low stretched resin-coated polyester, tested and labeled to meet or exceed DOT and CHP regulations. 4" X 30" is a standard length. All winch straps are availalbe in various lengths, custom stencil, and different colors.

P/N TD4LE 4" X 30' winch strap with loop end.
P/N TD4FH 4" X 30' winch strap with flat hook.
P/N TD4TR 4" X 30' winch strap with triangle.
P/N TD4CH 4" X 30' winch strap with chain anchor.
P/N TD4PE 4" X 30' winch strap with grab hook.
P/N TD4GH 4" X 30' winch strap with grab hook.
P/N TD2LE 2 " X 30' winch strap with loop end.
P/N TD3FH 3 " X 30' winch strap with loop end.

INTRODUCING

BLUE MONSTER EDGE WEBBING WITH REINFORCED EDGES FOR STRENGTH AND PERFORMANCE INCREASES THE LIFE OF THE STRAPS. ALL STRAPS ARE AVAILABLE IN "MONSTER EDGE WEBBING" THAT IS MORE RESISTANCE TO ABRASION AND CUTTING. AVAILABLE IN DIFFERENT COLORS.

P/N TD4LEME 4" X 30' winch strap with loop end.

The 4" webbing has a capacity of 20,000 lbs, work load limit is 5,000 lbs.
Also available in 24,000 lbs. capacity, work load limit is 6,000 lbs.
All straps can be stenciled with your name to prevent loss.

WARNING: All straps should be protected from sharp or rough edges. Straps cut, worn, or damaged need to be replaced immediately. It is the owner's and users responsibility to determine suitability of a product for any particular use. All strap assemblies or systems are strong as the weakest component including the point of attachment.

DO NOT EXCEED CAPACITIES. INSPECT STRAPS BEFORE EACH USE.